ECPS Side Discharge Evaporative Cooler
This cooler is based upon the ECPD unit and is designed for installations where a down discharge unit is either unsuitable or inconvenient.
This unit is particularly suited to wall mounted installations where the unit can be ducted straight into the side of a building. The use of a side discharge unit can often avoid excessive ductwork and can minimise bends which can often affect the performance of a cooler
This cooler has a lower air flow and cooling capacity than the down or top discharge unit since only 3 sides out of the 4 are used. Nominally rated air flow of 12,000m3hr and can cover a 180sqm area or a 30kW load from just 1.5kW of electricity.
Control - A wall control is supplied with the cooler which is fully connectable to any existing BMS system. This is normally connected to a thermostat to give automatic control. There is also a facility to connect to a timer, humidistat and fire alarm contact. An internal relay is also available to drive an external fan. The controller provides an integrated commissioning and maintenance cleaning sequence which provides a fault alarm code.
For more details on control please visit our control section.
Water Control - A patented water control system using a 4 probe system prevents excess water usage and ensures that the tank is drained completely to prevent the build-up of bacteria in the sump.
The ECPS is classed as LOW risk with regards to Legionella but in line with health and safety regulations a full legionella risk assessment can be provided when the units are commissioned should this be required.
Availability - stocked item
Size - height 950mm, length 1150mm width 1263mm
Volume - 1.3m?
Duct - length 645mm x width 645mm
Weight - dry 55kg, operating 92kg
Cabinet -injection moulded from polypropylene, UV stabilised and corrosion free
Electrical requirement - 240v 50Hz. 12Amp start 8A running. An external isolator is fitted as standard.
Water requirement - mains water supply minimum 1 bar max 7 bar. Minimum supply 500L/hr
Flow Rate - nominally rated at 12,000m?hr
Electrical supply - 240v50Hz 12A start 8A running
Warranty - two years parts only warranty subject to the cooler being maintained by EcoCooling approved service engineers
Colour - units can be colour coated to any RAL number