ECPD Down Discharge Evaporative Cooler
This cooler is designed specifically for roof mounting where the air can be discharged vertically down through the bottom of the cooler. It is ideal for industrial applications where an 8 way plenum chamber can be used to discharge the air low down into a building enabling spot cooling of work stations or machinery.
The cooler has a nominally rated air flow of 14,000m3hr and can cover a 250sq m area or a 15m diameter circle or a 35kW load from just 1.5kW of electricity.
Control - A wall control is supplied with the cooler which is fully connectable to any existing BMS system. This is normally connected to a thermostat to give automatic control. There is also a facility to connect to a timer, humidistat and fire alarm contact. An internal relay is also available to drive an external fan. The controller provides an integrated commissioning and maintenance cleaning sequence which provides a fault alarm code.
For more details on control please visit our control section.
Water Control - A patented water control system using a 4 probe system prevents excess water usage and ensures that the tank is drained completely to prevent the build-up of bacteria in the sump.
The ECPD is classed as LOW risk with regards to Legionella but in line with health and safety regulations a full legionella risk assessment is provided when the units are commissioned.
Availability - stocked item
Size - height 950mm, length 1170mm width 1170mm
Volume - 1.3m3
Duct - length 645mm x width 645mm
Weight - dry 55kg , operating 92kg
Cabinet - injection moulded from polypropylene, UV stabilised and corrosion free
Electrical requirement - 240v 50Hz. 12A start 8A running. An external isolator is fitted as standard.
Water requirement - mains water supply minimum 1 bar max 7 bar. Minimum supply 500L/hr
Flow Rate - nominally rated at 14,000m3hr
Warranty - two years parts only warranty subject to the cooler being maintained by EcoCooling approved service engineers.