Evaporative Cooling Installation Methods

There are two principles of installation: External and Internal

evaporative cooling installations

 

 

EXTERNAL INSTALLATION - DOWN DISCHARGE

The majority of coolers are installed in this way. The extract would typically be 80% of the total cooler capacity.

Roof mounted down discharge systems are typically mounted using a soaker sheet to provide a weather proof installation.

down discharge evaporative cooler, air cooling from ecocooling down discharge evaporative cooler , air cooling from ecocooling
Pitched Metal Roof – flat soaker sheet
Pitched metal roof – profiled soaker
down discharge evaporative cooler, air cooling from ecocooling down discharge evaporative cooler , air cooling from ecocooling
Pitched metal roof – GRP finish
Flat Roof – Felt
down discharge evaporative cooler, air cooling from ecocooling down discharge evaporative cooler , air cooling from ecocooling
Membrane Roof
With Attenuator
down discharge evaporative cooler, air cooling from ecocooling down discharge evaporative cooler , air cooling from ecocooling
Down discharge into side wall
Flat soaker sheet to ridge cap
down discharge evaporative cooler, air cooling from ecocooling down discharge evaporative cooler , air cooling from ecocooling
Glass panel replacement
Skylight replacement
down discharge evaporative cooler, air cooling from ecocooling down discharge evaporative cooler , air cooling from ecocooling
Evaporative Cooling at Bluechip
Blue Chip  external modular installation in Bedford using raised floors to provide 135 cubic meters of cooled air per second.

 

 

EXTERNAL INSTALLATION - TOP DISCHARGE

top discharge evaporative cooler, air cooling from ecocooling top discharge evaporative cooler , air cooling from ecocooling
Gantry mount
Floor mount
top discharge evaporative cooler, air cooling from ecocooling top discharge evaporative cooler , air cooling from ecocooling
Ducted
Ducted

 

EXTERNAL INSTALLATION - SIDE DISCHARGE

This installation is often used where roof access is difficult.  
side discharge evaporative cooler, air cooling from ecocooling side discharge evaporative cooler , air cooling from ecocooling
Side discharge into cladding With sound attenuator
side discharge evaporative cooler, air cooling from ecocooling side discharge evaporative cooler , air cooling from ecocooling
Side discharge into plant room
Side discharge into ducting

 

 

INTERNAL INSTALLATION - SUSPENDED UNIT

advantages of an internal suspended evaporative cooler

Where ventilation exists an internal unit can be suspended from the building structure. Air can then be directed for spot cooling or diffused as part of a larger scheme.

The hot, dry air is taken in and cooled air is distributed exactly where it is required. The stainless steel plenum chamber allows great flexibility in setting the direction of the air flow.

suspended unit evaporative cooler, air cooling from ecocooling top discharge evaporative cooler , air cooling from ecocooling
Pedestal
Internal Ducted

The ECPSDU is designed to be supported from a plain square duct with nominal external dimensions 645mm x 645mm.
Note that due to the variation in the moulding of plastics there may be some variation in these dimensions – the final duct must be manufactured to fit the cooler.

 

suspended unit evaporative cooler, air cooling from ecocooling
Suspended
spot cooling -  evaporative cooling pedestal

Internal coolers can be mounted on pedestals to provide spot cooling

 



















 

 

 



Ecocooling economical evaporative coolingEcocooling economical evaporative cooling Evaporative Cooling from EcoCooling .... a Low Energy, Low Carbon Alternative to Air-Conditioning