AIR COOLING EXAMPLES: Data Centre Cooling Factory Cooling Warehouse Cooling Industrial Cooling Office Cooling IT Room Cooling School Cooling
Ecocooling Evaporative Cooling Basic Control
The wall mounted controller gives the following functions:
Off/On – turns the controller on and off
Cooling – Depressing the cooling button brings in the water circuit. If this is not depressed the cooler acts purely as an air mover providing ventilation
Fan Speed – Five speeds are selectable
Auto/Manual – this is used when the cooler is connected to a thermostat and/or humidistat. The fan speed and the cooling are automatically adjusted to meet a set temperature. The hotter the building the faster the fan speed.
| Alarm – this flashes when there is a problem. The number of flashes indicate the problem | ||
 |
1 flash | Slow fill Auto Reset |
|
2 flashes | Overflow Manual Reset |
|
3 flashes | Probes out of sequence Manual Reset |
|
4 flashes | Abnormal evaporation Manual Reset |
|
5 flashes | Slow Drain Auto Reset |
|
6 flashes | External Alarm Auto Reset |
