With a maximum flow rate of 14,000m3/hr EcoCoolers contain an inbuilt fan and evaporative cooling pads.  This evaporative cooler is designed to be externally mounted and should be used as part of a mechanical ventilation system with a paired extract fan.  The standard configuration is down flow, where air is supplied from the base of the cooler into the area that requires cooling.

Configuration Options

Technical Specifications

Down Flow (Standard) Side Flow  Top Flow
Size (H x W x D) 950mm x 1150mm x 1150mm 950mm x 1290mm x 1150mm 1092mm x 1150mm x 1150mm
Weight Wet: 120kg Wet: 115kg Wet: 115kg
Cabinet Injection moulded from polypropylene, UV stabilised and corrosion free
Electrical Requirement 240v 50Hz. 12A start 8A running. External isolator fitted
Water Requirement Water supply minimum 1 bar max 7 bar. Minimum supply 500L/hr
Warranty Two years parts only warranty subject to the evaporative cooler being maintained by EcoCooling approved service engineers

 

 

Modes of Operation:

Ventilation Mode: In ventilation mode, the water circulation system is not in operation.  The coolers supply fan is used to bring external ambient air into the building.

 

Cooling Mode: In cooling mode, the water circulation system is in operation and the cooling pads are wetted. The evaporation of water from the pads results in a reduction in air temperature.

 

Alternative Options

External EcoCoolers are also available in a larger size (up to 18,000m3/hr), please see the ECP EcoCooler Large product page for more details.  Alternatively, if you are looking at an installation where there is no outside plant space, call our installations team for advice about plant rooms or have a look at our  ECT product ranges.

Installation Examples

The external EcoCooler evaporative cooler range is ideal for industrial and commercial environments which require blanket or spot cooling. If you are looking for an external passive system for data centres or air handling systems please see our WetBox product page.